Birthday pot Information

Adding wireless to standard Sprinkler system wiring.? - wireless sprinkler controller

I have a timer for 8 traditional irrigation area Toro, wired with 8 zones. Nothing special. 24V power adapter, a timer, and 24 valves. The timer is mounted in the garage.

I could pick up radio channels DGTL 8 / receiver has 8 relay-exposed, and the switching contacts. It was a unit of the surplus, but it works very well. When opening and closing relays on pressing a button on the remote. I would add to my existing irrigation system, you can turn in a remote area, while I'm adjusting every few months.

So I think the easiest way to add this wireless adapter on my sprinkler system wiring.

Question: Does anyone see a problem with just about the output relay as a "switch" that the transformer 24VAC existing terminal at the same time that the drives Toro? Basically, the device as a set of parameters now works, and I want the output relays in parallel to the 24V power supply in the area of the valve and the timer is available, get in touch, which is completely erased. The problems that you see here?